DOWSIL 734: Flowable and self-leveling

DOWSIL™ 734 Flowable Sealant is a one-part solventless silicone elastomer for general sealing and bonding applications. The flowable silicone will become tack-free in 7 minutes and will cure completely within 24 hours.

DOWSIL 734 is particularly suitable for sealing assemblies with fine joints as well as cable entries and connectors, to ensure that they remain watertight. Due to its good adhesion to other silicone rubbers, it is also a good solution for making field repairs on equipment where a part of an existing silicone encapsulant has been removed.


  • One-component adhesive/sealant

  • Cures at room temperature when exposed to moisture in the air

  • Acetoxy cure system

  • Flowable and self-leveling

  • Easy to apply

  • Cures to a tough, flexible rubber

  • Fast tack-free time

  • Good adhesion to many substrates

  • Stable and flexible from -65° C (- 85° F) to +180° C (+356° F).

  • Excellent dielectric properties

  • Complies with MIL-A-46106, FDA Reg 21 CFR 177.2600, and NSF 51 requirements

  • UL Listed

To order DOWSIL™ 734 Flowable Sealant call 270-765-2212 or email

NEW LENTEK™ L-360 Sandy Nitrile Coated Gloves

NEW LENTEK™ L-360 Sandy Nitrile Coated Gloves have 360º cut protection with an A6 ANSI/ISEA cut rating. The sandy nitrile coating provides a superior grip, and the reinforced thumb saddle extends the glove life. The lightweight, 13-gauge liner is comfortable and breathable for long wear. Don’t worry about dirt and debris falling into your gloves with the fitted, knitted wrists on the L-360. The L-360 sandy nitrile-coated gloves will be in stock by the first of the year. Pre-order today!


  • Sandy nitrile coating

  • ANSI/ISEA Cut Level: A6

  • 360º cut protection

  • Light-weight, 13-gauge stitch

  • Protects hands from grease, oils, hydrocarbons, and abrasions

  • Reinforced thumb saddle extends the glove life

  • Comfortable and breathable

To pre-order the LENTEK™ L-360 Sandy Nitrile Coated Gloves call 270-765-2212 or email

Effective and reliable insulating foam

LENTEK™ Foam Sealants fill, seal, and insulate gaps effectively with the power of long-lasting, water-resistant, expanding foam. The foam sealants provide a simple, cost-effective solution to eliminate unwanted airflow and improve energy efficiency in any exterior and interior space.

The foam sealants adhere to a large variety of substrates including wood, metal, masonry, glass, and most common building materials. These professional-grade sealants are sandable, paintable, and stainable. Both the fireblock and insulating foams are UL Classified and have no CFCs or HCFCs.

LENTEK Insulating Foam Sealant is triple expanding to ensure the gaps are sealed tight. The insulating foam is a natural color, while the fireblock foam is orange for easy identification and inspection. LENTEK Fireblock Foam Sealant has a B2 Fire Rating that is formulated to seal service penetrations and electrical runs through walls, impeding the spread of smoke and fire.

To order LENTEK™ Foam Sealants call 270-765-2212 or email

Featured Posts
Recent Posts